Honeywell HZ-0300 Owners Manual - Page 2

HZ-0300_OM.qxd 10/25/06 3:11 PM Page 2 19. Do not operate the product with a damaged cord or plug or if the product malfunctions, is dropped or damaged in any manner (see warranty). 20. Avoid contact with moving fan parts. 21. Place the product on a dry level surface. 22. Do not operate if the housing is removed or damaged. 23. SAVE THESE INSTRUCTIONS SET-UP • Place the All Season Comfort™ Fan & Heater on a firm, level, open surface free from obstructions and at least 3 ft. (0.9m) away from any combustible materials. DO NOT use on an unstable surface such as bedding or deep carpeting. Be sure the heater is not in a position where it may be tripped over by small children or pets. • With the product OFF (both the heater and fan on/off buttons will be elevated), plug into a polarized 120V wall outlet. • DO NOT FORCE THE POLARIZED PLUG INTO THE OUTLET; it will only fit one way. • Do not use with any converters or timers. OPERATING INSTRUCTIONS TO OPERATE THE HEATER MODE: • Press the red heater On/Off button ( ) on the top, next to the thermostat control, to turn the heater mode on. Thermostat Control Oscillation Button Fan Control Knob • The power light will illuminate on the front of the product. • Turn the thermostat knob clockwise up the heat. to turn Fig. 1 Heater On/Off Button Fan On/Off Button • When the room reaches a comfortable temperature, slowly turn the thermostat control counterclockwise until the heater goes off. This is the point at which the thermostat setting equals the room temperature. At this setting, the thermostat will automatically turn the heater on and off to maintain this selected temperature. • Press the red On/Off heater button to turn off and unplug the heater when you are finished using it. NOTE: THIS PRODUCT IS EQUIPPED WITH A SAFEGUARD™ ALERT HEAT INDICATOR BADGE (FIG. 2). WHEN THE SAFEGUARD™ ALERT BADGE LOCATED ON THE GRILL CHANGES FROM BLACK TO RED THE GRILL IS HOT TO THE TOUCH. DO NOT TOUCH THE GRILL UNTIL THE UNIT HAS BEEN TURNED OFF AND THE SAFEGUARD™ ALERT BADGE HAS TURNED BACK TO BLACK. USING THE OSCILLATION FEATURE: Your HZ-0300 All Season Comfort™ Fan & Heater is equipped with an Fig. 2 oscillation option. If you wish to use this feature, press the oscillation button ( ) and your unit will oscillate side to side. Push the oscillation button ( ) again to turn the oscillating feature off.