Honeywell HZ-338 User Guide - Page 4

Cause Damage To The Heater Or Per - instructions

Page 4 highlights

MODE: SET TIMER Set Timer Mode Adjust Up or Down Basic Remote LCD Remote • Press Mode until the Timer icon blinks. The Hour dis- play will appear. • Use the Up or Down arrows to set an operation time between 1 and 10 hours. • The heater will turn-off when time runs out. OSCILLATION When done, plug-in the heater and follow the OPERATION INSTRUCTIONS. For more troubleshooting tips, visit our website at: www.honeywellconsumerproducts.com NOTE: IF YOU CONTINUE TO EXPERIENCE A PROBLEM, PLEASE RETURN THE HEATER TO THE PLACE OF ORIGINAL PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO OPEN THE HEATER YOURSELF. DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY. IF YOU HAVE ANY QUESTIONS REGARDING THIS HEATER, PLEASE CALL OR WRITE: Honeywell Consumer Relations Department 250 Turnpike Road Southborough, MA 01772 Toll Free 1-800-332-1110 E-mail: [email protected] CLEANING AND STORAGE: Oscillation Basic Remote LCD Remote • The Oscillation feature functions in any power or mode setting. • Press the Oscillation button to toggle this feature on and off. TROUBLESHOOTING: We recommend that the heater be cleaned at least once a month and before off-season storage. • Turn the heater OFF and unplug it. Allow it to cool completely. • Use only a dry cloth to clean the external sur- faces of the heater. DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION. • Clean your heater using the above-mentioned steps, then pack the heater in its original container and store it in a cool, dry place. • This heater does not disassemble. If your heater shuts off unexpectedly, safety features may have been activated to prevent overheating. If this happens: • Be sure the power cord is plugged into a work- ing electrical outlet. • Check your thermostat setting. The unit may simply be off because you have reached your desired heat setting. • Check for any obstructions. If you find one, turn the heater OFF and unplug it. Wait at least 10 minutes to allow the heater to cool completely before removing any obstruction. ACCESSORIES: Your HZ-335 or HZ-336 series heater is compatible with both the Basic and Digital LCD Remote Control. To upgrade your heater, or to get a listing of heater accessories, visit our website at: www.honeywellconsumerproducts.com ELECTRICAL RATING: This product is rated 12.5 Amps (1500 Watts) at 120 VAC, 60 Hz. 4

  • 1
  • 2
  • 3
  • 4
  • 5

4
MODE:
SET TIMER
OSCILLATION
TROUBLESHOOTING
:
If your heater shuts off unexpectedly, safety fea-
tures may have been activated to prevent over-
heating.
If this happens:
Be sure the power cord is plugged into a work-
ing electrical outlet.
Check your thermostat setting. The unit may
simply be off because you have reached your
desired heat setting.
Check for any obstructions. If you find one,
turn the heater OFF and unplug it.
Wait at
least 10 minutes to allow the heater to cool
completely before removing any obstruction.
When done, plug-in the heater and follow the
OPERATION INSTRUCTIONS.
For more troubleshooting tips, visit our website at:
www.honeywellconsumerproducts.com
NOTE: IF YOU CONTINUE TO
EXPERIENCE A
PROBLEM, PLEASE RETURN THE HEATER
TO THE PLACE OF ORIGINAL PURCHASE OR
SEE YOUR WARRANTY. DO NOT ATTEMPT
TO OPEN THE HEATER YOURSELF. DOING
SO MAY VOID YOUR WARRANTY AND
CAUSE DAMAGE TO THE HEATER OR PER-
SONAL INJURY. IF YOU HAVE ANY QUES-
TIONS REGARDING THIS HEATER, PLEASE
CALL OR WRITE:
Honeywell
Consumer Relations Department
250 Turnpike Road
Southborough, MA 01772
Toll Free 1-800-332-1110
E-mail:
CLEANING
AND
STORAGE
:
We recommend that the heater be cleaned at
least once a month and before off-season stor-
age.
Turn the heater OFF and unplug it. Allow it to
cool completely.
Use only a dry cloth to clean the external sur-
faces of the heater.
DO NOT USE WATER,
WAX, POLISH, OR ANY CHEMICAL SOLU-
TION.
Clean your heater using the above-mentioned
steps, then pack the heater in its original con-
tainer and store it in a cool, dry place.
This heater does not disassemble.
ACCESSORIES
:
Your HZ-335 or HZ-336 series heater is compati-
ble with both the Basic and Digital LCD Remote
Control.
To upgrade your heater, or to get a list-
ing of heater accessories, visit our website at:
www.honeywellconsumerproducts.com
ELECTRICAL
RATING
:
This product is rated 12.5 Amps (1500 Watts) at
120 VAC, 60 Hz.
• Press Mode until the Timer icon blinks.
The Hour dis-
play will appear.
• Use the Up or Down arrows to set an operation time
between 1 and 10 hours.
• The heater will turn-off when time runs out.
Set Timer
Mode
Adjust Up or
Down
Set Timer
Basic Remote
LCD Remote
• The Oscillation feature functions in any power or
mode setting.
• Press the Oscillation button to toggle this feature on
and off.
Oscillation
Basic Remote
LCD Remote