Honeywell HZ-817 Owners Manual - Page 3

HZ-817 SERIES OPERATION • Place the heater on a firm, level, open surface free from obstructions and at least 3 feet (0.9 m) away from any combustible materials. • Never leave an operating unit unattended. Fig. 3 Control Knob Quick Heat • Plug the heater into an electrical wall outlet. • Touch the Power Button to turn the heater on. The power indicator light will illuminate. (Fig. 3) • To save up to 35% in energy bills, turn the Energy Smart™ knob to your desired temperature. There are four distinct settings of 65°F/18°C, 70°F/ 21°C, 75°F/23°C, and 80°F/26°C. The Energy Smart™ heater will automatically select the appropriate power level to best accommodate your desired temperature. As the air temperature in the room approaches the set temp, the heater will automatically lower the power consumption and provide consistent warmth without wasting energy. Power Button Power Indicator Light • The illuminated LED lights will indicate what the current room temperature is. • The LOW setting ( ) is designed to operate only if the temperature is below 55°F (12°C). If the room temperature is above 55°F (12°C), the heater will remain OFF until the temperature drops below this level. If you want the heater to operate when the room is above 55°F (12°C), then move the Thermostat to a higher setting. • To override the Energy Smart™ feature and produce maximum heat, turn the knob fully clockwise to HIGH ( ). This will produce 1500W of heat at all times. QUICK HEAT® FEATURE Quick Heat® will propel a steady blast of warm air out of your baseboard. This can help heat your room more quickly. You will hear a fan operating in this mode. You can also turn the Quick Heat® setting off and the heater will operate silently. SAFETY FEATURES This heater is equipped with several devices and features for added protection. • A high temperature safety control prevents overheating (Hi Limit). • A back-up thermal circuit breaker that will permanently shut down the heater should it operate at higher than normal temperatures (HZ-614, HZ-615, HZ-617 and HZ-817 only). • A SafeGuard™ Alert Heat Indicator Badge that indicates the grille is hot and should not be touched - turns from black to red (HZ-614C, HZ-617, HZ-617C and HZ-817 only). • Tip-over switch feature - The HZ-817 SERIES ONLY is equipped with a tip-over switch that disables the heater if it is tipped over. To restore power to the heater, stand the heater up properly and press the power button. • A three-prong grounded plug. • This heater was created using a high quality safety plastic. Fig. 4 Heat Indicator Badge Do not touch the grille until the unit has been turned off and the SafeGuard™ Alert Badge has turned back to black.