Honeywell HZ-817 Owners Manual - Page 4

TROUBLESHOOTING If your heater shuts off unexpectedly or fails to operate, one of your heater's safety features may have been activated to prevent overheating. • Be sure the power cord is plugged into a working electrical outlet. • Check for any obstructions. If you find one, turn the heater OFF and unplug it. • Wait at least 10 minutes to allow the heater to cool completely before removing any obstruction. When done, plug in the heater and follow the OPERATION instructions. CONSUMER RELATIONS Mail questions or comments to: Kaz, Incorporated Consumer Relations Dept. 250 Turnpike Road Southborough, MA 01772 Call us toll-free at: 1-800-477-0457 E-mail: [email protected] Or visit our website at: www.kaz.com Please be sure to specify a model number. NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST OR SEE YOUR WARRANTY. DO NOT RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE PRODUCT OR PERSONAL INJURY. CLEANING AND STORAGE We recommend that the heater be cleaned at least once a month and before off-season storage. • Turn the heater OFF and unplug it. Allow it to cool. • Use a dry cloth only to clean the external surfaces of the heater. DO NOT USE WATER, WAX, POLISH OR ANY CHEMICAL SOLUTION. • Clean your heater using the above-mentioned steps, then pack the heater in its original container and store it in a cool dry place. • This heater does not disassemble. ELECTRICAL RATINGS This product is rated 12.5 amps (1500W) at 120V, 60 Hz.