Honeywell HZ370GP User Guide - Page 2
Step 1: Power, Step 2: Heat Settings, Step 3: Temperature Set Function - heater
UPC - 092926345815
View all Honeywell HZ370GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 2 highlights
HZ-370_3750_385_OM.qxd 6/7/06 5:05 PM Page 2 SET-UP • Remove the heater from the box and remove all packaging materials • Place the heater on a firm, level, open surface free from obstructions at least 3 feet (0.9m) way from any wall, furniture or combustible material. OPERATION Power/Temperature Contol Knob Heat Setting Button Power/Temperature Contol Knob Timer Button HZ-370 Series Heat Setting Button Oscillation Button Timer Button HZ-3750 & HZ-385 Series STEP 1: POWER • Plug the unit into your wall outlet. When the unit is plugged in, it will beep. • Press the Power button ( ) once to turn the heater on. The power indicator light ( ) will illuminate. The heater will operate on high power, continuous operation (Fig. 1) • Press the power button a second time to turn the heater off. STEP 2: HEAT SETTINGS • When the heater is turned on it will automatically operate on max heat, continuous run. • Press the heat setting button ( ) once to change the heat setting from max power to energy saver mode ( ). In this setting the heater will operate at 900 watts and run continuously. (Fig. 2) • Press the heat setting button a second time to change the heat setting back to max power (1500 watts), continuous run. NOTE: Unless the temperature set function is activated the heater will run continuously. Fig. 1 HZ-370 Series STEP 3: TEMPERATURE SET FUNCTION • To set the desired temperature, turn the temperature knob ( ), the temperature display will change from the current room temperature to display a default temperature of 75° F (23.8° C) (Fig. 3). • The desired temperature can be set between 45° F (7.2° C) and 80° F (26.6° C). • Turn the temperature knob counterclockwise to decrease the desired temperature or clockwise to increase the desired temperature. • Once the desired temperature is set the current room temperature will appear. • The heater will turn off shortly after the Desired Temperature is reached and the Temperature Display will blink. • The heater will turn back on when the room temperature drops below the Desired Temperature. The Temperature Display will then stop blinking and will display the current room temperature. Fig. 2 HZ-370 Series Fig. 3 HZ-3750 & HZ-385 Series