Honeywell HZ370GP User Guide - Page 4
The Heater To The Original Place Of Purchase Or See Your Warranty.do Not Attempt
UPC - 092926345815
View all Honeywell HZ370GP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
HZ-370_3750_385_OM.qxd 6/7/06 5:05 PM Page 4 SAFETY FEATURES This heater is equipped with several devices and features for added protection: • A tip-over switch that disables the heater if accidentally tipped over. • A SafeGuard™ Alert Heat Indicator Badge that indicates the grille is hot (turns from black to red) and should not be touched. • A high temperature safety control prevents overheating (Hi-limit). • A back-up thermal circuit breaker that will permanently shut down the heater should it operate at higher than normal temperatures. TROUBLESHOOTING If your heater shuts off unexpectedly, safety features may have been activated to prevent overheating. If this happens: • Be sure the power cord is plugged into a working electrical outlet. • Check your Desired Temperature setting. The unit may be off because you have reached your Desired Temperature setting. • Check for any obstructions. If you find one, please remove it. • Turn the heater OFF and unplug it, wait at least 10 minutes to allow the heater cool completely, and then plug in the heater and follow the OPERATION instructions. CONSUMER RELATIONS Mail questions or comments to: Kaz, Incorporated Consumer Relations Dept. 250 Turnpike Road Southborough, MA 01772 Call us toll-free at: 1-800-447-0457 E-mail: [email protected] Or visit our website at: www.kaz.com Please be sure to specify a model number. NOTE: IF YOU EXPERIENCE A PROBLEM, PLEASE CONTACT CONSUMER RELATIONS FIRST, RETURN THE HEATER TO THE ORIGINAL PLACE OF PURCHASE OR SEE YOUR WARRANTY. DO NOT ATTEMPT TO OPEN THE MOTOR HOUSING YOURSELF, DOING SO MAY VOID YOUR WARRANTY AND CAUSE DAMAGE TO THE HEATER OR PERSONAL INJURY. CLEANING AND STORAGE We recommend that the heater be cleaned at least once a month and before off-season storage. • Turn the heater OFF and unplug it. Allow it to cool completely. • Use only a dry cloth to clean the external surfaces of the heater. DO NOT USE WATER, WAX, POLISH, OR ANY CHEMICAL SOLUTION. • Clean your heater using the above-mentioned steps, then pack the heater in its original container and store in a cool, dry place. • This heater does not disassemble.