Honeywell MS1690 User Guide - Page 27

TROUBLESHOOTING GUIDE Symptoms Possible Causes Solution The print quality of the bar code is suspect. Check print mode. The type of printer could be the problem. Change print settings (i.e. change to econo mode or high speed). The unit beeps at some bar codes and NOT for others of the same bar code symbology. The aspect ratio of the bar code is out of tolerance. The bar code may have been printed incorrectly. The scanner is not configured correctly for this type of bar code. Check print mode. The type of printer could be the problem. Change print settings (i.e. change to econo mode or high speed). Check if it is a check digit/character/or border problem. Check if check digits are set properly. The minimum symbol length setting does not work with the bar code. Check if the correct minimum symbol length is set. The unit scans the bar code but there is no data. The configuration is not set correctly. Make sure the scanner is configured for the appropriate mode. The unit scans but the data is not correct. The configuration is not set correctly. Make sure that the proper PC type AT, or PS2 is selected. Verify correct country code and data formatting are selected. Adjust inter-character delay symptom. The scanner and host may not be configured for the same interface parameters. Check that the scanner and the host are configured for the same interface parameters. 23