Honeywell RCA902N1004/N Owner's Manual - Page 18
mark until movement causes the lights to illuminate. Leave the control
UPC - 085267184250
View all Honeywell RCA902N1004/N manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Installation Instructions The DUSK control determines how dark it needs to be before detected movement will trigger the controlled lights and can be set as follows: 2) Turn the DUSK control knob to the setting and wait until darkness falls. 3) When the ambient light level reaches the level at which you wish the lights to turn on (i.e. at dusk), SLOWLY turn the control in a clockwise direction towards the mark until movement causes the light(s) to illuminate. Leave the control set at this point. 4) The motion detector will become operative at approximately the same level of darkness each evening. Observe the operation of the unit over several nights to ensure it is set as required and adjust as necessary. If the unit activates too early (i.e. when it is too light), turn the control slightly towards the mark. If the unit activates too late (i.e. when it is too dark), turn the control slightly towards the mark. 69-2157EFS-05 16 69-2157EFS_C.indd 16 9/22/2008 11:54:04 AM