Honeywell RCA902N1004/N Owner's Manual - Page 20

Receiver manual. - n wireless motion detector manual

Get Honeywell RCA902N1004/N - Wireless Motion Detector PDF manuals and user guides
UPC - 085267184250
View all Honeywell RCA902N1004/N manuals
Add to My Manuals
Save this manual to your list of manuals

Page 20 highlights

Installation Instructions Troubleshooting If your wireless system fails to work properly, complete the relevant test or tests which follow. Also refer to the trouble shooting guide in your Chime or Switching Receiver manual. Motion Detector does not detect movement... • Check that the battery in the detector is not exhausted. • Detection is set incorrectly. Motion Detector does not activate Chime at all... • Check that the battery in the detector is not exhausted. • Make sure you use new batteries. • Check that the sound on the Chime is switched ON. • Check that the Receiver has correctly learned the detector identification code by following the test procedure. If necessary reset the Receiver and relearn the code. Motion Detector activates Chime during the night and not during the day... • Check that the detector operating switch is set to the DAY position. 69-2157EFS-05 18 69-2157EFS_C.indd 18 9/22/2008 11:54:05 AM

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
Installation Instructions
69-2157EFS—05
18
Troubleshooting
If your wireless system fails to work properly, complete the relevant test or tests
which follow. Also refer to the trouble shooting guide in your Chime or Switching
Receiver manual.
Motion Detector does not detect movement…
• Check that the battery in the detector is not exhausted.
• Detection is set incorrectly.
Motion Detector does not activate Chime at all…
• Check that the battery in the detector is not exhausted.
• Make sure you use new batteries.
• Check that the sound on the Chime is switched ON.
• Check that the Receiver has correctly learned the detector identification code by following the
test procedure. If necessary reset the Receiver and relearn the code.
Motion Detector activates Chime during the night and not during the day…
• Check that the detector operating switch is set to the DAY position.
69-2157EFS_C.indd
18
9/22/2008
11:54:05 AM