Honeywell RTH6300B Owner's Manual

Honeywell RTH6300B Manual

Get Honeywell RTH6300B PDF manuals and user guides View all Honeywell RTH6300B manuals
Add to My Manuals
Save this manual to your list of manuals

Honeywell RTH6300B manual content summary:

  • Honeywell RTH6300B | Owner's Manual - Page 1
    RTH6300B Programmable Thermostat Installation Guide
  • Honeywell RTH6300B | Owner's Manual - Page 2
    place your old thermostat in the trash if it contains mercury in a sealed tube. Contact your local waste management authority for instructions regarding recycling and proper disposal. Need Help? For assistance with this product please visit www.honeywell.com/yourhome or call Honeywell Customer Care
  • Honeywell RTH6300B | Owner's Manual - Page 3
    RTH6300B Programmable Thermostat Table of contents Getting started Installation tips 2 Pre-installation checklist 3 Old thermostat removal Remove old thermostat 5 Identify and label wires 6 New thermostat installation Wallplate mounting 9 Wire connections 12 Battery installation 14
  • Honeywell RTH6300B | Owner's Manual - Page 4
    follow the simple, step-by-step instructions in the following pages. Install in three simple steps • Label wires and remove your old thermostat (see pages 5-8). • Install and wire your new thermostat (see pages 9-15). • Set your new thermostat to match your heating/cooling system (see pages 16-21
  • Honeywell RTH6300B | Owner's Manual - Page 5
    RTH6300B Programmable Thermostat Pre-installation checklist Check to make sure your package includes the following items: RTH6300B thermostat (wallplate attached to back) Quick reference card Operating manual Wall anchors and mounting screws (2 each) Caution card 3 Wire labels
  • Honeywell RTH6300B | Owner's Manual - Page 6
    Installation Guide Pre-installation checklist Required tools & supplies • No. 2 Phillips screwdriver • Small pocket screwdriver • Drill • Drill bit (3/16" for drywall, 7/32" for plaster) • Hammer • Pencil • Electrical tape • Level (optional) • Two fresh AA alkaline batteries 4
  • Honeywell RTH6300B | Owner's Manual - Page 7
    RTH6300B Programmable Thermostat Remove your old thermostat 1 Turn off power at heating/cooling system (or fuse/circuit-breaker panel). 2 Remove cover and thermostat, but leave wallplate with wires attached. Leave wallplate in place Is there a sealed tube containing mercury? If so, see inside
  • Honeywell RTH6300B | Owner's Manual - Page 8
    Installation Guide Did you purchase right thermostat? Count wires to check. Count the number of wires coming out of the wall and attached to terminals in your old thermostat. If any of them are attached to a terminal marked "C" or "C1" do not count that wire in your total. If the total (not counting
  • Honeywell RTH6300B | Owner's Manual - Page 9
    RTH6300B Programmable Thermostat Identify wires you will not use If any wires are not attached to terminals in your old thermostat, do not connect them to your new thermostat. If a wire is attached to a terminal marked "C" or "C1," disconnect it.You will not connect it to your new thermostat. Wrap
  • Honeywell RTH6300B | Owner's Manual - Page 10
    Installation Guide Label wires and remove old wallplate Use a screwdriver to disconnect wires one by one.As you disconnect each wire, wrap it with the label matching the letter on your old thermostat. (Adhesive labels are supplied in your thermostat package.) Remove the old wallplate only after all
  • Honeywell RTH6300B | Owner's Manual - Page 11
    RTH6300B Programmable Thermostat Remove wallplate and install quick reference card Insert finger into wire hole and pull to remove wallplate from new thermostat. Insert quick reference card into slot in back of thermostat. Wallplate Thermostat 9
  • Honeywell RTH6300B | Owner's Manual - Page 12
    Installation Guide Mark wallplate mounting position 1 Pull wires through wallplate 2 Level wallplate if desired (lay level across tabs) 3 Mark positions of both screw holes 10
  • Honeywell RTH6300B | Owner's Manual - Page 13
    RTH6300B Programmable Thermostat Mount wallplate 1 Drill holes at pencil-marked locations 3/16" holes for drywall 7/32" holes for plaster 2 Use hammer to tap anchors into holes until flush with wall 3 Place wallplate over anchors and insert screws. Check level if desired, then tighten screws. 11
  • Honeywell RTH6300B | Owner's Manual - Page 14
    Guide Connect wires (typical installation) 1 Match each labeled wire with same letter on terminal 2 Use a screwdriver to loosen screw terminals, insert wires, then tighten screws 3 Push any excess wire back into the wall opening. Labels don't match? If labels do not match letters on thermostat
  • Honeywell RTH6300B | Owner's Manual - Page 15
    on the thermostat, check the chart at right and connect to terminal as shown here (see notes, below). If wires will be connected to both R and Rc terminals, remove metal jumper (see page 12). Do not connect both O and B if you have a heat pump. Connect O wire to O/B W. Wrap B wire with electrical
  • Honeywell RTH6300B | Owner's Manual - Page 16
    Installation Guide Install batteries Install two fresh AA alkaline batteries in back of thermostat. After installation, batteries can be changed without removing the thermostat from the wall (see Operating Manual for more information). Back of thermostat 14
  • Honeywell RTH6300B | Owner's Manual - Page 17
    RTH6300B Programmable Thermostat Mount thermostat and restore electrical power 1 Align the 4 tabs on the wallplate with corresponding slots on the back of the thermostat, then push gently until the thermostat snaps into place. 2 Restore electrical power at the heating/cooling system, or at the fuse/
  • Honeywell RTH6300B | Owner's Manual - Page 18
    Installation Guide System setup (set thermostat to match your system) Next, you must set the thermostat to control the heating and cooling system in your home. Press and hold the and FAN buttons to enter system setup. Function number Setting 10 Done Next To begin, press and hold the and FAN
  • Honeywell RTH6300B | Owner's Manual - Page 19
    RTH6300B Programmable Thermostat Function 1: System type 10 Done Next Press to change setting. When correct setting is selected, press NEXT to display next function. Press the or button to select the type of climate control system you have in your home: 0 Heating & cooling: Gas, oil or electric
  • Honeywell RTH6300B | Owner's Manual - Page 20
    Installation Guide Function 2: Heat pump changeover valve 20 Done Next Press to change setting. When correct setting is selected, press NEXT to display next function. Press the or button to select whether your changeover valve is used in heating or cooling: 0 Cooling changeover valve: Use this
  • Honeywell RTH6300B | Owner's Manual - Page 21
    RTH6300B Programmable Thermostat Function 3: Heating fan control Press the or button to select your heat- 3 0 ing system and fan operation: Done Next Press to change setting. When correct setting is selected, press NEXT to display next function. 0 Gas or oil heat: Use this setting if you
  • Honeywell RTH6300B | Owner's Manual - Page 22
    Installation Guide Function 5: Heating cycle rate 55 Done Next Press to change setting. When correct setting is selected, press NEXT to display next function. Press the or button to select your heating system and optimize its operation: 5 Gas or oil furnace: Use this setting if you have a
  • Honeywell RTH6300B | Owner's Manual - Page 23
    RTH6300B Programmable Thermostat Function 14: Temperature display 14 Press the or button to select 0 Fahrenheit or Celsius temperature display: 0 Fahrenheit temperature display (°F) 1 Celsius temperature display (°C) Done Next Press to
  • Honeywell RTH6300B | Owner's Manual - Page 24
    have difficulty with your thermostat, please try the suggestions below. Most problems can be corrected quickly and easily. Display is blank • Make sure fresh AA alkaline batteries are properly installed (see page 14). Temperature settings do not change Make sure heating and cooling temperatures
  • Honeywell RTH6300B | Owner's Manual - Page 25
    RTH6300B Programmable Thermostat In case of difficulty Heating or • cooling system does not respond • Press SYSTEM button to set system to Heat the Inside temperature. • Check circuit breaker and reset if necessary. • Make sure power switch at heating & cooling system is on. • Make sure
  • Honeywell RTH6300B | Owner's Manual - Page 26
    Installation Guide In case of difficulty Heat pump issues cool air in heat mode, or warm air in cool mode • Check Function 2: Heat Pump Changeover Valve to make sure it is properly configured for your system (see page 18). Heating and • Check Function 1: System Type to make sure it is set to
  • Honeywell RTH6300B | Owner's Manual - Page 27
    RTH6300B Programmable Thermostat Customer assistance Model number xxxxxxx Date code xxxxxxx For assistance with this product, please visit www.honeywell.com/yourhome. Or call Honeywell Customer Care toll-free at 1-800-468-1502. To save time, please remove the battery holder and note your model
  • Honeywell RTH6300B | Owner's Manual - Page 28
    Installation Guide Limited 1-year warranty Honeywell warrants this product, excluding battery, to be free from defects in the workmanship or materials, under normal use and service, for a period of one (1) year from the date of purchase by the consumer. If at any time during the warranty period the
  • Honeywell RTH6300B | Owner's Manual - Page 29
    RTH6300B Programmable Thermostat Limited 1-year warranty This warranty does not cover removal or reinstallation costs.This warranty shall not apply if it is shown by Honeywell that the defect or malfunction was caused by damage which occurred while the product was in the possession of a consumer.
  • Honeywell RTH6300B | Owner's Manual - Page 30
    Installation Guide Limited 1-year warranty THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL MAKES ON THIS PRODUCT.THE DURATION OF to state. If you have any questions concerning this warranty, please write Honeywell Customer Relations, 1985 Douglas Dr, Golden Valley, MN 55422 or call 1-800-4681502.
  • Honeywell RTH6300B | Owner's Manual - Page 31
  • Honeywell RTH6300B | Owner's Manual - Page 32
    1985 Douglas Drive North Golden Valley, MN 55422 Honeywell Limited-Honeywell Limitée 35 Dynamic Drive Scarborough, Ontario M1V 4Z9 www.honeywell.com/yourhome ® U.S. Registered Trademark. Patents pending. Copyright © 2005 Honeywell International Inc. All rights reserved. Printed in U.S.A. Document
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
RTH6300B
Programmable Thermostat
Installation
Guide