Honeywell RTH6300B Owner's Manual - Page 14
Connect wires typical installation
View all Honeywell RTH6300B manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
Installation Guide Connect wires (typical installation) 1 Match each labeled wire with same letter on terminal 2 Use a screwdriver to loosen screw terminals, insert wires, then tighten screws 3 Push any excess wire back into the wall opening. Labels don't match? If labels do not match letters on thermostat, see next page. Remove metal jumper if you have both "R" and "Rc" wires 12
Installation Guide
12
Connect wires (typical installation)
1
Match each labeled wire
with same letter
on terminal
2
Use a screwdriver to
loosen screw terminals,
insert wires, then tighten
screws
3
Push any excess wire back
into the wall opening.
Labels don’t match?
If labels do not match letters
on thermostat, see next page.
Remove metal jumper if you
have both “R” and “Rc” wires