Honeywell T8132B1005 Owner's Manual - Page 4
Programming Your Thermostat
View all Honeywell T8132B1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 4 highlights
Programming Your Thermostat The thermostat can be programmed in your hand before it is installed if the batteries are installed or after it is on the wall. If you need to install or replace the batteries, refer to the Maintaining Your Thermostat section. The following personal Program Schedule can be helpful for planning your program schedule of time and temperature settings for various times of the day. Four time periods are available during weekdays-WAKE, LEAVE, RETURN, and SLEEP. View these periods individually on the display as you press the Set Schedule key. WAKE is the time the thermostat turns on the heating/cooling equipment after an energy saving period. When deciding 4 what time to set for your WAKE period, include extra lead time, depending on the outside temperature and your furnace response time, to give the furnace a head start to heat the house before you get up. (This will be a higher temperature during heating season, or a lower temperature during cooling season.) LEAVE is the time period you can set for an energy-saving temperature while you are away at work or school. (This will be a lower temperature during heating season, or a higher temperature during cooling season.) RETURN is the time the thermostat turns on the heating/cooling equipment after an energy saving period. When deciding what time to set for your RETURN period, include extra lead time, 69-0803-1