Honeywell T8132B1005 Owner's Manual - Page 9
Setting Fan Switch
View all Honeywell T8132B1005 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Check Programs Press Set Schedule key repeatedly to view each time and temperature on the display. Press the Run Program key once to return to the program. Cancel a program-Press the Set Schedule key until the program to cancel shows. Pressing the two Time keys together cancels the program. Permanently Change a program-Repeat the steps in the Heating Program or Cooling Program sections, as applicable. Return to the normal program or the starting program-Press the Run Program key once. Setting Fan Switch Only the zone 1 thermostat has control of the fan operation. Fan switching positions are as follows: AUTO: Single-speed fan turns on automatically with air conditioner or furnace. Twospeed fan usually runs on high with air conditioner and runs on low with the furnace. ON: The fan runs continuously (recommended setting for zoning). Use for improved air circulation during special occasions or for more efficient electronic air cleaning. (In a heat-only system, the fan runs continuously only if the fan relay is connected to the thermostat G terminal.) 9 69-0803-1