Honeywell T8631A Owner's Manual - Page 7

PROGRAMMING YOUR THERMOSTAT STEP 3 SETTING THE COOLING TEMPERATURES The program times are the same for both heating and cooling. Only the cooling temperatures need to be programmed if you have already programmed for heating. If you change program times for cooling, you are also changing them for heating! To set times as you program the cooling temperatures, use the TIME AHEAD and BACK keys as described in Step 2. First program the WAKE temperature for weekdays. WAKE SET HEAT/COOL DAY Press and release. The display shows WAKE, the time and tempera- SUN ture you programmed for heating. WAKE AM SET PT ON HEAT Press and release so COOL shows on the display, along with the SUN programmed cooling temperature. WAKE AM SET PT COOL If display reads SAT or SUN, press and hold until MON TUE WED THU AM SET PT MON TUE WED THU FRI COOL FRI appears. WAKE 7 WARMER COOLER Program the LEAVE temperature, if desired. LEAVE WARMER COOLER Press and hold until the display shows the desired temperature. AM SET PT MON TUE WED THU FRI COOL WAKE If the display blinks while you hold down TEMPERATURE WARMER or COOLER, you have reached the setting limit. Press and release. The display shows LEAVE, the time programmed for heating and 78° F. AM SET PT MON TUE WED THU FRI COOL LEAVE Press and hold until the display shows the desired temperature. AM SET PT MON TUE WED THU FRI COOL LEAVE Program the RETURN temperature, if desired. RETURN Press and release. The display shows RETURN, the time programmed for heating and 78° F. PM SET PT MON TUE WED THU FRI COOL RETURN 8