Honeywell TE219ELW User Manual - Page 10

TROUBLESHOOTING Check here before contacting customer service. Issue Main unit Remote sensor Symptom US Atomic Time signal is not received Cannot locate remote sensor Cannot change the channel Cannot change the C° to F° and back Data does not match data on the main unit Solution Place unit by the window and keep it there overnight Check batteries Check location Press and hold DOWN ( ▼) button on the main unit to search for the signal form the remote sensor Press "RESET" after setting the channel Press "RESET" after setting C/F Initiate manual sensor search (Press and hold DOWN ( ▼) button on the main unit) SPECIFICATIONS Main Unit Indoor Temperature Proposed operating range: 23.0°F to 122.0°F (-5°C to +50°C) Temperature resolution: 0.2°F (0.1°C) User-selectable (°F or °C) temperature display Maximum number of remote sensors: 3 (one included) RF range: Maximum 100 feet (30 meters) Readings update interval: every 45 seconds EL backlight Low battery indicators - for each remote channel and main unit Clock Precise atomic time 4 US Time Zones 12/24 hour time format Crescendo 4 minutes alarm with 5 minutes snooze Remote Sensor Remote Temperature Proposed operating range with alkaline batteries: -4°F to + 158°F (-20°C to + 70°C) Proposed operating range with lithium batteries: -38.8°F to +158°F (-38.8°C to + 70°C) Temperature resolution: 0.1°C/0.2°F RF Transmission Frequency: 433 MHz Temperature transmission cycle: approximately 45 seconds Low battery indicator Wall-mount of Table stand Power Main unit: 2 AA size (UM-3) 1.5V batteries (not included) Remote Sensor: 2 AA size 1.5V batteries (not included) Dimensions Main unit: 3.33(L) x 6.19 (H) x 1.11(D) inches Remote sensor: 2.37(L) x 4(H) x 1 (D) inch 19 19 20