Honeywell TE831W-2 User Manual - Page 13

A. UP B. DOWN C. SET D. CHANNEL E. MEMORY F. HISTORY G ALARM/CHART H. SENSOR - Selects the next available window counter-clockwise - Increases parameters -If depressed and held, activates an atomic time signal search - Selects the next available window clockwise - Decreases parameters -If depressed and held, activates all remote sensors signal search - Alternates the parameters for the selected window - If depressed and held, enters into the programming mode or changes parameter's units - Pressed again closes programming mode and confirms selected parameters - Manually selects the channel # for receiving temperature and humidity sensor data - Enables the temperature and humidity channel auto-scan mode - Records: moon phase, temperature, humidity, rainfall and wind records. Then stores in memory - Moon phase: Determined by the day of month interval - Sets and stores pressure & altitude units in Memory - Allows displaying the sea-level pressure history - Displays alarm times and programmed alerts for temperature, rainfall and wind. - Press and hold, to enter the alarm/alert programming mode - Press and hold in pressure and forecast window, to view different bar charts - Sets the light sensor to: automatic, on or off - AUTO, ON, OFF I. SENSITIVITY - Adjusts the automatic light sensor sensitivity - HIGH/LOW J LIGHT/SNOOZE K. AC/ DC ADAPTOR INPUT - Illuminates the display backlight for 5 seconds - Activates Snooze delay for alarms (programmable 1 to 15 minutes) - Connects main unit to the power outlet through the AC to 7.5V DC adapter provided L. USB Port - USB Port provides PC connectivity 13