Honeywell TE831W-2 User Manual - Page 6
Rain Gauge TS906
UPC - 843616002880
View all Honeywell TE831W-2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
• Set one sensor to Channel 1 and the second sensor to Channel 2, etc. The sensors must operate on separate channels. Install 2 "AA" size batteries matching the polarities shown in the battery compartment. IMPORTANT: When channel number is selected, it will be displayed on the sensor's LCD display • Replace the battery compartment door and secure the screws. • Secure the thermo-hygrometer remote sensor in the desired location. Mounting • The remote thermo-hygrometer sensor can be placed on the flat surface or mounted on the wall in vertical position • Use the screws when mounting the thermo-hygrometer sensor on the wall Placement tips: • The remote thermo-hygrometer sensor should be placed in the area with a free air circulation and sheltered from the direct sunlight and an extreme weather conditions. • Ideally, place the thermo-hygrometer sensor above the natural surfaces (such as a grassy lawn). • Avoid placing the thermo-hygrometer sensor near sources of heat such as chimneys and heating elements. • Avoid areas that collect or radiate heat from the sun, such as metal, brick/concrete structures, paving, or patio decks. • The best location for temperature measurements is 4 feet (1.25meters) above the ground. Rain Gauge TS906 FEATURES • Precipitation measurement • Remote rainfall data transmission to the main unit via 433 MHz signal • 100 feet (30 meters) transmission range without interference • Built-in installation level A. Rain gauge bucket Contains electronic components B. Knob Secures the top on the rain gauge bucket C. Rain gauge feet Secures the rain gauge in place 6