Honeywell TE852W User Manual - Page 8

• Activates manual search for signals from the remote sensors • Enables or disables time alarms (W) and (S) and Ice Warning Alarm D. SET button • Toggles between different modes • If depressed and hold, activates programming mode or changes unit of selected parameter • Confirms programmed parameters E. MEM button • Allows displaying current, minimum, maximum readings of the indoor and remote temperature & humidity • Allows displaying memory records of the wind speed and wind gust • If depressed and hold, clears collected records memory • Activates a searching mode of sunrise/sunset records F. HISTORY button • Allows displaying the SEA LEVEL pressure history records G and J. ALARM button • Allows displaying all available alarms - for time, temperature and pressure • If depressed and hold, enters into the alarm programming mode for selected parameter • If depressed and hold in barometric pressure/forecast mode, allows viewing of the temperature and humidity history charts H. WALL- MOUNT RECESSED OPENING • Keeps the unit on the wall I. BATTERY COMPARTMENT • Accommodates 2 (two) UM-3 or AA 1.5V alkaline batteries K. SNOOZE/LIGHT button • Stops all alarms temporarily 15 • Activates a backlight for 5 seconds L. CHANNEL button • Recalls a different remote sensor reading - 1,2, 3, 4 or 5 • Activates the remote channels auto-scan feature NAVIGATING THROUGH THE MODES The main unit has five (5) different modes (windows) each displaying a separate data category. When a specific mode is selected the corresponding icon will start flashing. Press UP button on the back of the main unit to cycle through the modes clockwise or DOWN anti-clockwise. PRESSURE WINDOW Displays: • Current pressure (local or sea level) and history bar-chart • Weather forecast • Moon phase CLOCK WINDOW Displays: • Time and calendar 15 16