Honeywell VISTA 15P User Guide - Page 31

Paging Feature (cont'd) About Manual Paging Your system may be set up so you can manually send a message to up to four (VISTA20P Series) or two (VISTA-15P Series) pagers. • Your installer programs the paging function key and the pager phone numbers. • Pressing the paging keys sends the message 9 9 9 - 9 9 9 9 to the selected pager. • This message could mean "call home", "call your office", or any other prearranged meaning. • See the Paging chart at the back of this manual for details of the paging setup for your system. 1. Press and hold the programmed Paging Key for at least 2 seconds (wait for beep), then press the pager number* (1-4) representing the pager intended to receive the message. 2. The recipient, on seeing the 999-9999 message, will understand the prearranged meaning of this signal. * If no number is pressed, the message is sent to pager 1. Alpha Display: ∗∗∗∗DISARMED READY TO ARM Fixed-Word Display: READY 999-9999 Pager Display Latch Key Paging You can program a schedule that causes a pager report to be sent if the system is not DISARMED by the scheduled time (see Scheduling section, event "03"). For example, a working parent might want a message to be sent to a pager if their child did not arrive home from school and disarm the system by a certain time. If programmed, the message that is sent is: 7 7 7 - 7 7 7 7 . National Security Systems Inc (800) 457-1999 - 31 -