Honeywell XK108 Owners Manual - Page 11
Turn System On And Stay Inside, Turn The System On: Perimeter Sensors Instant Mode...
View all Honeywell XK108 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
TURN SYSTEM ON AND STAY INSIDE To turn the perimeter portion of your burglar alarm on and move around freely inside is the STAY mode. Check to make sure the system is READY; when ready press: STAY Followed by your user code. If successful the On/Off (arm) light will be lit and the Stay light will also be lit. REMEMBER: You must turn the system off if you want to open the door or leave the premises after the exit time has passed. TURN THE SYSTEM ON: PERIMETER SENSORS INSTANT MODE AND STAY INSIDE In INSTANT STAY mode the perimeter portion of your burglar alarm system is on and the time delays are eliminated from your normal entry/exit door(s). All interior protection is off so you are free to move around inside. Check to make sure the system is READY, when ready press: INSTANT followed by STAY followed by your user code. If successful the On/Off light, the Instant light and the Stay light will all be on. TURN THE SYSTEM ON WITH ALL SENSORS IN INSTANT RESPONSE MODE In INSTANT mode all alarm sensors will report an alarm immediately if activated including the doors that normally have a delay to allow you to turn the system off. Check to make sure the system is READY, when ready press: INSTANT followed by your user code. If successful the On/Off light and the Instant light be on. XL-20 Owner's Manual - Page 9