Honeywell XK108 Owners Manual - Page 8

3) STAY LED This LED displays whether the system has been armed in the STAY mode or the STAY/INSTANT mode. If the INSTANT LED is ON and the STAY LED is ON, then the system is in the STAY/INSTANT mode. If the INSTANT LED is OFF and the STAY LED is ON, then the system is in the STAY mode only. STAY/ INSTANT is enabled in programming question 05, location 2. In either mode the STAY LED indicates the following: ON Interior zones are bypassed OFF Interior zones are active armedl 4) INSTANT LED This LED displays whether the system has been armed in the STAY/INSTANT mode, meaning that the system is currently armed, all delay zones are instant and all interior zones are bypassed. NOTE: See programming question 05, location 2. ON Delay zones are currently instant OFF Delay zones are normal 5) AC/LOW BATTERY LED This indicator light displays the current power status of the panel as follows; ON AC is present OFF No AC, running on battery backup Slow Blink Low battery condition detected 6) READY LED This LED displays whether the system is ready for arming. The READY light is common to all BURGLARY ZONES with the following indications: ON System ready to be armed OFF System not ready to be armed Slow Blink Indicates Installer programming mode Fast Blink Alarm Memory Mode 7) STAY BUTTON The STAY button enables arming the system, excluding zones programmed as interior zones. This will provide exterior protection of the location while XL-20 Owner's Manual - Page 6