Hoover CH85005 Manual - Page 6

Operation & Assembly Instructions

Get Hoover CH85005 PDF manuals and user guides View all Hoover CH85005 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 6 highlights

™ 10 Quart / 1.5 HP Backpack Vacuum OPERATION & ASSEMBLY INSTRUCTIONS PREPARATION AND OPERATION - DRY ONLY! This vacuum is equipped with a air-thru motor and is designed for dry pickup only. Unpack the carton and remove the vacuum and attachments (if purchased with Tools). GETTING STARTED: 1. Make sure your on/off switch is in the OFF position. 2. Remove lid and check to make sure you have both a cloth filter bag and paper filter bag in place. Secure lid back onto vacuum body tightening securely. Both bags must be used at all times. Any damage resulting from the lack of using both bags will not be covered under warranty. 3. Thread your safety power cord around the built in cord knob on the side of the backpack (need picture to reference). Do not tie or loop the pigtail cord with the extension cord. 4. Loosen the shoulder and waist belt straps and slide vacuum on. 5. Connect, and tighten waist belt ensuring that majority of the weight is on your hips not your shoulders. 6. Adjust the shoulder straps for comfort. 7. Connect the sternum straps for added support and ideal fit. 8. Plug your vacuum into a properly installed outlet. 9. Turn unit on and proceed with vacuuming. 10. Always store vacuum , safety power cord and tools in a cool door place indoors. NOTE: The weight of the vacuum should be distributed on your hips. Adjust any strap as needed for your custom fit. To Change Paper Filter Bag: 1. Unclip lid latches and lift lid off of the body. 2. Remove full paper bag from the tank and dispose of properly. 3. Take new paper filter bag and set inside cloth filter bag (expanding it to the sides of the cloth filter bag. 4. Reinstall the top cap, clamping the lid latches down tightly. Cloth Filter Maintenance: The cloth filter should be inspected and cleaned each time you empty the tank. DO NOT wash the cloth filter. It could case shrinkage or the cloth and damage to the gasket. Simply shake off any dust or loose particles and brush the exposed surface with a soft bristle brush. CAUTION: Always exercise caution when handling the vacuum. Dropping the vacuum could cause permanent damage to the internal components. Page 5

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
OPERATION & ASSEMBLY INSTRUCTIONS
PREPARATION AND OPERATION - DRY ONLY!
This vacuum is equipped with a air-thru motor and is designed for dry pickup only.
Unpack the carton and
remove the vacuum and attachments (if purchased with Tools).
GETTING STARTED:
Make sure your on/off switch is in the OFF position.
1.
Remove lid and check to make sure you have both a cloth filter bag and paper filter bag in place. Secure lid
2.
back onto vacuum body tightening securely.
Both bags must be used at all times.
Any damage resulting
from the lack of using both bags will not be covered under warranty.
Thread your safety power cord around the built in cord knob on the side of the backpack (need picture to
3.
reference). Do not tie or loop the pigtail cord with the extension cord.
Loosen the shoulder and waist belt straps and slide vacuum on.
4.
Connect, and tighten waist belt ensuring that majority of the weight is on your hips not your shoulders.
5.
Adjust the shoulder straps for comfort.
6.
Connect the sternum straps for added support and ideal fit.
7.
Plug your vacuum into a properly installed outlet.
8.
Turn unit on and proceed with vacuuming.
9.
Always store vacuum , safety power cord and tools in a cool door place indoors.
10.
NOTE: The weight of the vacuum should be distributed on your hips.
Adjust any strap as needed for your cus
-
tom fit.
To Change Paper Filter Bag:
Unclip lid latches and lift lid off of the body.
1.
Remove full paper bag from the tank and dispose of properly.
2.
Take new paper filter bag and set inside cloth filter bag
3.
(expanding it to the sides of the cloth filter bag.
Reinstall the top cap, clamping the lid latches down tightly.
4.
Cloth Filter Maintenance:
The cloth filter should be inspected and cleaned each time you empty the tank.
DO NOT wash the cloth filter.
It could case shrinkage or the cloth and damage to the gasket.
Simply shake off any dust or loose particles and
brush the exposed surface with a soft bristle brush.
CAUTION: Always exercise caution when handling the vacuum. Dropping the vacuum could cause permanent
damage to the internal components.
Page 5
10 Quart / 1.5 HP Backpack Vacuum
™