Hoover CH85005 Manual - Page 7

™ 10 Quart / 1.5 HP Backpack Vacuum OPERATION & ASSEMBLY INSTRUCTIONS CONTINUED Hepa Models: When the white disk inside your dome filter is discolored, replace it with a new Hepa Filter with bag support. Replacement time frame of the Hepa filter depends on the frequency and application of use. For best results, replace every 6 months. IMPORTANT: Following the instructions above is critical in prolonging the life of your vacuum. All filters must be used at all times. The backpack comes assembled you will need to install the hose to the wand, and the wand to the attachment. ASSEMBLY OF ATTACHMENTS: Wand Assembly (For 2-piece Wand Only): • Align the button lock of the upper wand section with the opening for button lock on the lower wand section. • Push the sections together until the button lock slides into place and the lock is secured. To Connect Wand to Hose: • Connect the tapered end of the wand to the swivel cuff at the end of the hose. To Connect Wand to Attachments: • Turn wand nut counterclockwise approximately four complete turns. • Insert the tool into wand and coupling. • While holding the tool in place, turn nut clockwise until want nut is fully locked. Page 6