Hoover F6207-900 Owners Manual - Page 11

Cleaning UphoBsteW Check fabric cleaning code°Look on the furniture manufacturer's tag fbr a 'W' or 'WS' code, These codes indicate that it is alright to use your carpet cleaner to clean the upholstery_ Do not use tile carpet cleaner on upholstery marked 'S', 'X' or 'Dry Clean Only'. Fig, 5,1 2. Vacuum upholstery thoroughly with .your vacuum cleaner's attachments° 3_ Jest detergent for colorfastness on a hidden area of upholstery° Wet a white cloth or paper towel with some detergent_ Gently rub onto a hidden area of upholstery. Wait ten minutes_ Blot with white clofll or paper towel and check for color transfer,. Pretreat spots and stains with Hoover Spot and Stain Spray, Spray spot or area with Spot and Stain Spray° Then proceed with the next cleaning steps. For stubborn spots or stains, refer to the stain guide included r with your cleaner. Fig. 5.2 5. Fill solution tank with hot tap water and proper amount of Hoover detergent (see page 5) Use only Hoover brand detergents in your carpet cleaner. Other brands may damage the carpet cleaner. Fig° 53 6. Attach hose and tool (see pages 7-B)_ Fig_ 5r4 74 Place handle in fult upright position. Turn cleaner OK Squeeze and hold trigger (A)to release cleaning solution_ Gently press tool into fabric and slowly pull the tooI over the fabric Fig. 5.5 9. Let go of trigger and pull tool over same area to pick up dirty solution without putting down more solution..Continue using dw strokes until you see only a little solution coming up through the tool 10. Do not make the uphoMery too wet! Use no more than two strokes while releasing solution.. Always Follow with dry strokes - the more the better Listen carefully! When the motor sound changes (rises in pitch}, the recovery tank needs to be emptied. When water has reached the Fullline in the recovery tank, the cleaner will NOT pick up dirty solution._ Allow upholstery to dry, Avoid using upholstery until it is dpt. Increased air circulation (open doors, turn on fans, etc) will help upholstery dry thoroughly to prevent the growth of'mold or mildew, tl