Hoover F7410 Manual - Page 6

1-18 1-19 Pull tool down and outward. To reposition the tool, reverse this procedure. How to reattach tool cover The tool cover is designed with a break-away feature which allows it to snap free if it is pushed open too far. To reattach, align hinges of cover with holes on sides of tool storage area. Snap door into place. 2. How to use Cleaner Description 2-1 1 3 2 4 18 5 20 19 6 7 9 21 8 22 10 11 12 17 16 23 14 13 24 15 The assembled carpet cleaner will look like the drawing. Model with SpinScrub™ hand tool is shown. 1. Hand grip 2. Solution trigger: press to release cleaning solution 3. ON/OFF switch 4. Wash/Rinse switch 5. SpinScrub™ hand tool (not included with all models) 6. Carrying handle 7. Clean water tank handle 8. Clean water tank 9. Detergent container 10. Recovery tank handle 11. Recovery tank: holds dirty solution 12. Recovery tank latches 13. SpinScrub mode selector 14. Solution tube connection port 15. Edge cleaners: provided on both sides of nozzle to remove dirt near baseboards. 16. Nozzle 17. Hose connection port 18. Cord hook: rotates for quick cord release 19. Hose 20. Hose/tool caddy 21. Stair/upholstery nozzle 22.Bare floor tool (available at additional cost if not included with your cleaner) 23.Cord/hose hook 24. Handle release pedal This carpet cleaner is intended for household use. Operate carpet cleaner only at voltage specified on data plate on back of cleaner. Plug carpet cleaner into a properly grounded outlet. 6