Hoover SH40065 Product Manual - Page 11

Clearing blockages ! CAUTION ! To reduce the risk of personal injury - Unplug vacuum before servicing. Low suction or pick up may be due to a blockage in the system. Refer to the following steps to check for blockages, continuing with each step until the blockage is found: 3.14 The flexible hose can be disconnected from the vacuum cleaner by pressing the release button on hose connector and pull out as shown. Remove any blockages found then reconnect the hose securely. 3.15 Plug cleaner in, turn on, and check hose end for suction. Remove any obstructions. 3.16 Remove power nozzle from wand and attach wand to hose. Check for suction and remove any blockages. 3.17 Remove power nozzle from wand and turn over to bottom. Unlock nozzle cover latches. 3.18 Turn power nozzle over to top and open hinged nozzle cover to access brushroll. 3.19 Clean debris from brushroll. 3.14 3.16 3.18 3.15 3.17 3.19 Actual model may vary from images shown. 11