Hoover SH80005CA Manual - Page 8

Caution, Important - power

Get Hoover SH80005CA PDF manuals and user guides View all Hoover SH80005CA manuals
Add to My Manuals
Save this manual to your list of manuals

Page 8 highlights

4. MAINTENANCE The only maintenance your Power Canister requires is emptying the dust container as required and periodically cleaning the filter. Filter: How to Clean ! CAUTION ! To reduce the risk of injury from moving parts, unplug Power Canister before servicing. Remove the dirt container by unlatching the latches located on each side of the dirt container. Place a plastic grocery bag over the dacron/cloth filter and around the cyclonic deflector that surrounds the filter. 4.1 Using the plastic bag as hand protection from dirt particles, shake the filter to cause any particles adhering to the filter to fall into the bag. Replace the dirt container and secure latches. If the cloth filter should need to be removed, grasp it near the top and pull towards the middle of the unit in order to remove. 4.2 To replace the cloth filter, you must decrease the circumference of the filter by pulling one side of the filter towards the center of the filter to create a "V" or "U" shape. Place the filter back into the unit and let the filter snap outward into the groove. 4.1 4.2 IMPORTANT Printing must be on the inside of the cloth filter when installed. Make sure the cloth filter is fitting properly into the groove so it will not come out when the machine is turned on. Failure to do so could void your warranty. Clearing Blockages Determine if the blockage is in the hose or piping by inserting hose in an inlet valve. Check to see if there is any suction at another inlet valve by opening the cover. If there is, plug the hose into the second wall valve and feel the end of the hose to see if there is regular suction. If the blockage is in the hose, insert a long blunt item, such as a broom handle, to clear the blockage. If the blockage is in the pipe, insert hose into wall valve and place hand over end of hose to cut off air flow. Place your hand on and off the end of hose rapidly several times. If this does not clear the blockage, contact your local Hoover Sales and Service Center (See Service Section). Check tools, wands, etc. for blockages. 8

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
8
4. MAINTENANCE
CAUTION
!
!
To reduce the risk of injury from moving parts,
unplug Power Canister before servicing.
The only maintenance your Power Canister requires is emptying the dust container as required and
periodically cleaning the filter.
Remove the dirt container by unlatching the latches
located on each side of the dirt container.
Place a plastic grocery bag over the dacron/cloth
filter and around the cyclonic deflector that sur-
rounds the filter.
4.1 Using the plastic bag as hand protection from
dirt particles, shake the filter to cause any particles
adhering to the filter to fall into the bag.
Replace the dirt container and secure latches.
If the cloth filter should need to be removed, grasp
it near the top and pull towards the middle of the
unit in order to remove.
4.2 To replace the cloth filter, you must decrease
the circumference of the filter by pulling one side of
the filter towards the center of the filter to create a
“V” or “U” shape.
Place the filter back into the unit and let the filter
snap outward into the groove.
FILTER:
How to Clean
IMPORTANT
Printing must be on the inside of the cloth filter
when installed.
Make sure the cloth filter is fitting properly into
the groove so it will not come out when the
machine is turned on. Failure to do so could void
your warranty.
4.1
4.2
Determine if the blockage is in the hose or piping by inserting hose in an inlet valve.
Check to see if there is any suction at another inlet valve by opening the cover. If there is, plug the hose
into the second wall valve and feel the end of the hose to see if there is regular suction.
If the blockage is in the hose, insert a long blunt item, such as a broom handle, to clear the blockage.
If the blockage is in the pipe, insert hose into wall valve and place hand over end of hose to cut off air flow.
Place your hand on and off the end of hose rapidly several times.
If this does not clear the blockage, contact your local Hoover Sales and Service Center (See Service
Section).
Check tools, wands, etc. for blockages.
CLEARING BLOCKAGES