Hoover U5175900 Manual - Page 8

3-8 3-9 3-10 H E Although not necessary, the filter can be removed from the lid for cleaning. Pull filter off lid and tap bottom of filter. To replace, firmly press filter onto lid until it stops. Replace lid and filter on filter chamber. Replace chamber on dirt cup. Place bottom of cup behind tab (H) and press cup into cleaner. Rotate dirt cup handle (E) up to lock cup in place. 3-11 Final filter 3-12 3-13 I J Correct Incorrect Be certain that the dirt cup is locked in the correct position. Cleaning final filter The final filter assists in returning clean air to the room. Remove dirt cup. Press latch (I) and remove filter grid. Lift out filter (J) and hand wash in cold water with a mild detergent. Let filter air dry then reposition. Replace filter grid and dirt cup. Should you want to replace this filter, ask for HOOVER part no. 40110004. Do not operate cleaner without any of the filters in place. Headlight replacement What to buy This cleaner uses a 12 volt, wedge base type 912 bulb, HOOVER part No. 27313107. 3-14 3-15 3-16 K Disconnect cleaner from electrical outlet. Remove dirt cup as described in Fig. 3-2. Insert a flat screwdriver into slot and remove the access door (K). 8 Pull old bulb straight out of socket. Push new bulb straight into socket until locked in place. Excessive force is not required. Snap access door into place. Reposition dirt cup (Fig. 3-10).