Hoover U8120 Manual - Page 5

2. How to use The assembled cleaner will look like the drawing. Cleaner description 2-1 1 2 6 5 9 3 16 21 4 20 8 10 18 7 12 15 13 14 11 1. Handle 18. Cord hooks: wrap 2. ON/OFF switch cord around hooks for 3. Tool cover 4. Dusting brush 5. Crevice tool 6. Furniture nozzle 7. Brush roll ON/OFF switch 8. Bag container storage. The top hook rotates right or left for easy cord release. 19. Carrying handle 20. Extension wand 21. Crevice wand: stores in wand. 17 9. Bag container handle 10. Final HEPA filter 11. Three position handle release pedal: step on 19 lever to lower handle to operating or low positions. 12. Nozzle control knob: slide knob to correct setting for height of carpet being cleaned. 13. Furniture guard 14. Headlight 15. Edge groomers 16. Hose Operate cleaner only at 17. Carry handle/Hose holder voltage specified on data plate on bottom of cleaner. This cleaner is intended for household use. Polarized plug To reduce the risk of electric shock, this appliance has a polarized plug (one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper outlet. Do not change the plug in any way. ON-OFF switch Plug cord into electrical outlet. To turn cleaner ON, push switch up. To turn cleaner OFF, push switch down. 2-2 2-3 2-4 A Transporting cleaner Put handle in upright position. Tilt cleaner back on rear wheels. Push forward. Carrying cleaner Use the carrying handle to lift the cleaner. Do not lift cleaner using dirt cup handle (A). Handle positions The handle of your cleaner has three positions; upright for storage and when using cleaning tools; operating position for general operation on carpet and floors; low for reaching under low furniture. Step on handle release lever to lower handle. Continued § 5