Hoover UH30010COM Manual - Page 11

Troubleshooting - review

Get Hoover UH30010COM PDF manuals and user guides
UPC - 073502029961
View all Hoover UH30010COM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

TROUBLESHOOTING 6. TROUBLESHOOTING WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING PROBLEM Cleaner won't run POSSIBLE REASON 1. Power cord not firmly plugged into outlet. 2. Blown fuse or tripped breaker. 3. Stall protection has tripped. (power light is flashing) 4. Thermal protector activated. (power light is flashing) POSSIBLE SOLUTION 1. Plug unit firmly into wall outlet. 2. Check fuse or breaker in home. Replace fuse/reset breaker. 3. Unplug unit. Remove debris from brushroll. 4. Turn the cleaner off and disconnect it from the electrical outlet. Then allow cleaner to cool for 30 minutes. If the thermal protector continues to activate see Needs Service solution #5. 5. Needs Service. Dust escaping from cleaner Cleaner won't pick up or low suction 1. Disposable bag is full. ("Check Bag" indicator illuminated red) 2. Disposable bag not installed correctly. 1. Disposable bag not installed correctly. 2. Disposable bag is full. (check bag indicator illuminated red) 3. Brushroll is worn out. 4. Poly V-belt is worn. 5. Take to service center. To find nearest location, visit our website at www.hoover.com or call 1-877-697-5866. Monday through Friday 8am - 7pm EST 1. Replace disposable bag - Pg. 9. 2. Review disposable bag removal and replacement - Pg. 9. 1. Review disposable bag removal and replacement - Pg. 9. 2. Replace disposable bag - Pg. 9. 3. Replace brushroll - Pg. 10. 4. Refer to needs service above. ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE. Exclusive Hoover Platinum Collection™ Member Services Line 1.877.MYPLTNM (1.877.697.5866) In the event that further assistance is required, see your Yellow Pages for an authorized HOOVER® Dealer or visit our website at www.hoover.com. Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and readily available from an authorized HOOVER® Dealer or retailer. Always identify your cleaner by the model number and manufacturing code when requesting information or ordering replacement parts. (The model number appears on the bottom of the cleaner.) 11

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
WARNING: TO REDUCE RISK OF PERSONAL INJURY - UNPLUG CLEANER BEFORE SERVICING
PROBLEM
POSSIBLE REASON
POSSIBLE SOLUTION
Cleaner
won’t run
Dust escaping
from cleaner
Cleaner
won’t pick up
or low suction
ANY OTHER SERVICING SHOULD BE DONE BY AN AUTHORIZED SERVICE REPRESENTATIVE.
Exclusive Hoover Platinum Collection™ Member Services Line 1.877.MYPLTNM
(1.877.697.5866)
In the event that further assistance is required, see your Yellow Pages for an authorized HOOVER® Dealer or visit our website at www.hoover.com.
Costs of any transportation to and from any place of repair are to be paid by the owner. The service parts used in this unit are easily replaced and
readily available from an authorized HOOVER® Dealer or retailer.
Always identify your cleaner by the model number and manufacturing code when
requesting information or ordering replacement parts.
(The model number appears on the bottom of the cleaner.)
TROUBLESHOOTING
1. Power cord not firmly plugged into
outlet.
2. Blown fuse or tripped breaker.
3. Stall protection has tripped. (power
light is flashing)
4. Thermal protector activated. (power
light is flashing)
5. Needs Service.
1. Disposable bag is full. (“Check Bag”
indicator illuminated red)
2. Disposable bag not installed correctly.
1. Disposable bag not installed correctly.
2. Disposable bag is full.
(check bag
indicator illuminated red)
3. Brushroll is worn out.
4. Poly V-belt is worn.
1. Plug unit firmly into wall outlet.
2. Check fuse or breaker in home. Replace fuse/reset breaker.
3. Unplug unit.
Remove debris from brushroll.
4. Turn the cleaner off and disconnect it from the electrical
outlet. Then allow cleaner to cool for 30 minutes. If the
thermal protector continues to activate see Needs Service
solution #5.
5. Take to service center.
To find nearest location, visit our
website at www.hoover.com or call 1-877-697-5866. Monday
through Friday 8am - 7pm EST
1. Replace disposable bag - Pg. 9.
2. Review disposable bag removal and replacement - Pg. 9.
1. Review disposable bag removal and replacement - Pg. 9.
2. Replace disposable bag - Pg. 9.
3. Replace brushroll - Pg. 10.
4. Refer to needs service above.
6. TROUBLESHOOTING
11