Hoover UH70400 Manual - Page 10

Filters: When to Clean To maintain optimal performance, filters should be cleaned every two months under normal use. ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. Do not use vacuum without dirt cup or filters in place. 4.5 4.6 Rinsable Filter: How to Clean Remove dirt cup as described in Fig. 4.2. 4.5 Twist the dirt cup lid to open. 4.6 Pull tab to remove rinsable filter. Rinse with water for two minutes or until water runs clear. Then squeeze out excess water. Allow 24 hours for filter to dry completely. Replace filter, tab side out. Close lid securely by twisting dirt cup lid until it clicks as shown in Fig. 4.5. Replace dirt cup as described in Fig 4.4. Rinsable Filter: What to Buy When used and maintained properly, your Rinsable Filter should not need replacement within the warranty period. If desired, additional filter is available. Ask for Hoover® Part No. 303903001. IMPORTANT Allow filter to dry completely before replacing. Dry filter on edge so air circulates on both sides of filter. This may take up to 24 hours. Filter Made With HEPA Media: How to Clean ! CAUTION ! To reduce the risk of injury from moving parts, unplug vacuum before servicing. Do not use vacuum without dirt cup or filters in place. 4.7 4.7 Remove dirt cup. 4.8 Unlock filter Door (A). 4.9 Remove the filter and hold over a trash receptacle and tap out dirt and debris. Return filter and replace dirt cup on vacuum. IMPORTANT DO NOT RINSE OR WASH THE FILTER CARTRIDGE. Filter Made With HEPA Media: What to Buy When used and maintained properly, your Filter should not need replacement within the warranty period. If desired, additional filter is available. Ask for Hoover® Part No. 303902001. 4.8 A 4.9 10