Hoover UH72400 Product Manual - Page 23

CYCLONIC FILTER ASSEMBLY: How to Clean ! WARNING ! To reduce the risk of personal injury - Unplug before cleaning or servicing. 4.11 A Remove dirt cup as described in Fig. 4.5. 4.11 Lift the filter assembly (A) up out of the dirt cup. 4.12 Dirt and debris can be cleaned from the filter assembly with the dusting/ upholstery tool. 4.13 Place the filter assembly (A) in the dirt cup, aligning the D-shaped tab on the top of the dirt cup. Press down firmly to place the filter assembly back in place. Replace dirt cup lid. Replace dirt cup as described in Fig. 4.4. BRUSHROLL: How to Clean ! CAUTION ! To reduce the risk of injury from moving parts - Unplug before servicing. 4.14 Turn vacuum over so bottom side is facing up. Remove any debris and/or hair from brushroll. For additional maintenance required for belt or brushroll please contact a HOOVER® service provider at 1-800-944-9200. 4.15 Vacuum is equipped with an automatic brushroll shut off in event of overload or jam. 4.16 To reset the brushroll, press the ON/OFF Brushroll switch OFF. Then press the ON/OFF Brushroll switch again to ON. After resetting the brushroll may still be blocked. Check for obstructions in the brushroll area and remove any obstructions. 4.14 4.12 4.13 A 4.15 4.16 12