Hoover UH72630 Product Manual - Page 8

3. TOOLS Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas. The vacuum is ready for tool use when handle is in upright position. SELECT PROPER TOOL (Tools may vary per model) 3.1 A B C D E A. Use Upholstery Tool to clean upholstered furniture and carpeted stairs. B. Turbo Tool may be used for upholstered furniture, and carpeted stairs. C. Telescoping Wand is used to give extra length to your hose. D. Crevice Tool may be used in tight spaces, corners and along edges. E. Articulating Tool may be used to clean hard to reach areas such as ceiling fans and bookshelves. REMOVING HOSE 3.2 When using cleaning tools, place cleaner 3.2 handle in the upright position. The agitator brushroll will not rotate when the cleaner is in the upright position. To remove hose for tool use, press the hose release button and pull hose end out. 3.3 A FLOOR To lock back into place, push hose into hose tube until you hear a click. 3.3 Set air valve for desired use. Hose Floor. HOSE Turn valve back counterclockwise to FLOOR position until it clicks (A). IMPORTANT Vacuum will only pick up debris by the Hose/ Tools when the valve dial is placed into "HOSE" position. Valve dial must be returned to "FLOOR" position in order to pick up debris thru the floor Nozzle. ATTACH WAND AND TOOLS (Tools may vary per model) ! WARNING ! Unplug before connecting Air-Powered Hand Tool. 3.3 A B 3.3 Attach tool or wand to the hose (A). Attach tool to wand (B) by pushing it firmly onto the wand. Twist wand or tool slightly to tighten or loosen the connection. To extend wand, twist counter-clockwise to the unlocked position, extend wand & twist clockwise until tight. Reverse to collapse. ! CAUTION ! Not to be used for grooming a pet. HOW TO CLEAN TOOLS To clean Hose and Turbo Tool, wipe with a damp cloth. DO NOT submerge in water. Other cleaning tools may be washed in warm water with a mild detergent. Rinse and air dry 24 hours before using. Actual model may vary from images shown. 8