Hoover WH10200 Manual - Page 6
Warning - replacement filters
UPC - 073502032831
View all Hoover WH10200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 6 highlights
2. MaintenanCe Familiarize yourself with these home maintenance tasks as proper use and care of your cleaner will ensure continued cleaning effectiveness. Any other servicing should be done by an authorized service representative. ! WARNING ! HIGH VOLTAGE. To reduce the risk of electric shock - unplug Air Purifier before servicing. rinsable Pre-filter The rinsable pre-filter extends the life of your filter made with HEPA media by trapping larger airborne particles before they reach the filter made with HEPA Media. The pre-filter is black in color and is attached to the filter made with HEPA media by hook and loop fastener. We recommend that you inspect the pre-filter once a month to ensure that it is clean and therefore working most effectively. Before inspecting the pre-filter, switch off the unit, and unplug it from the AC outlet. 2.1 FILTER MADE WITH HEPA MEDIA FOAM PRE-FILTER 2.1 When you observe that the pre-filter is becoming clogged and requires cleaning, remove the pre-filter from the filter assembly and either gently vacuum it or gently rinse it under a running tap. (NOTE: Do not use any cleaning solutions, as these may damage the pre-filter.) Allow filter to dry. rePlaCeMent of filter Made witH HePa Media Your Air Purifier is equipped with a feature that automatically advises you when your filter made with HEPA Media needs replacement. A red light will illuminate reminding you to change the filter. Replace the filter with Hoover Part Number: AH60010 and then use a paper clip to press the "Filter Reset" button next to the red light. Press and hold until beep occurs and light turns off. To replace the filter made with HEPA media: - Switch off the unit, and unplug it from the AC outlet. - Remove the rear grille and filter made with HEPA media. - Replace the old filter made with HEPA media ensuring that the pre-filter is aligned correctly. - Replace the rear grille. uV bulb rePlaCeMent iTnhseidUe Vth/eTiAOi2r feature is activated by a fluorescent bulb Purifier. As with all bulbs, this will require periodic replacement, depending on frequency of use. To ensure bulb is operational, periodically look at back of the assembled product for a blue glow through the grille. Checking in a low light environment or in the dark will aid in seeing the glow. Replace the UV Bulb with Hoover part #440001068. 2.2 To replace the UV bulb: - Switch off the unit, and unplug it from the AC outlet. - Remove the rear grille and filter made with HEPA Media. - Remove the TiO2 coated screen. - Loosen the larger screw (2.2 A) on the top clamp and the larger screw on the bottom clamp. Do not remove the screws entirely. - Gently grasp bulb at the top and pull outward until bulb is free of clamp (2.2 B). Repeat for the bottom of bulb. Place new bulb in position and apply very light pressure to top of bulb to seat. Repeat steps for bottom of bulb. - Tighten both screws. Reinstall TiO2 coated screen, Filter made with HEPA Media and rear cover. A B ! WARNING ! To avoid injury do not touch the glass. Use a tissue to remove. The ultra violet bulb in this product contains mercury. Dispose according to Local, State or Federal Laws. For information please refer to www. lamprecycle.com NOTE: The TiO2 coated screen does not require replacement or cleaning. 6