Hoover WH10200 Manual - Page 7

Power Cord Care - Do not rest anything on the power cord. - Do not place the Air Purifier where people or pets may trip over or walk on the power cord. - Do not pick the unit up by the power cord. - Inspect the power cord before use to ensure the cord and plug are in a good condition. 3. TROUBLESHOOTING If a minor problem occurs, it usually can be solved quite easily when the cause is found by using the checklist below. Any other servicing should be done by an authorized service representative. ! WARNING ! To reduce risk of personal injury - unplug product before servicing. PROBLEM POSSIBLE SOLUTION The air purifier will not 1. Check that the power cord is securely plugged into an AC outlet. power on. 2. Check that the rear grille is securely closed. 3. Check that the unit is on a level surface The airflow is reduced. 1. Check that there is adequate airflow around the unit. 2. Check that the pre-filter is not clogged. 3. Check that the filter made with HEPA Media is not clogged. 4. Specifications Power Source: AC 120V/60HZ Power Consumption: 50 Watts Weight: 7.3lbs Dimensions: 15.2 x 9.3 x 6.5 inches 5. Service To obtain approved Hoover® service and genuine Hoover® parts, locate the nearest Authorized Hoover® Warranty Service Dealer (Depot) by: • Visit our website at hoover.com (U.S. Customers) or hoover.ca (Canadian customers). Follow the service center link to find the service outlet nearest you. • For an automated referral of authorized service outlet locations call 1-800-944-9200. Do not send your product to Hoover®, Inc., Company in Glenwillow for service. This will only result in delay. If you need further assistance: To speak with a customer service representative call 1-800-944-9200; Mon-Fri 8am-7pm EST. Always identify your product by the complete model number when requesting information or ordering parts. (Label located on side of product.) PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE. 7