Hotpoint GSM2260NSS Quick Specs - Page 1

GSM2260N GE Spacemaker® Under-the-Sink Dishwasher Dimensions and Installation Information (in inches) Note: Undersink dishwashers can be installed only under sinks and not under other appliances. Plumbing-Hot Water Only: Use 3/8" O.D. copper tubing or 1/2" O.D. plastic tubing minimum inlet line. Water valve has 3/8" internal threads. Hand cut-off valve is recommended. Electrical: Fuse circuit with 15 amp or 20 amp standard fuse or circuit breaker. Total amp load is 8.6. Dishwasher operates on 120V, 60HZ power, Two-wire cable (14 Ga. Min.) with ground must be installed. Specifications: Inlet water temperature recommended-minimum 120°F at dishwasher. Inlet water pressure required-15 to 120 lbs./sq. inch. Note: All rough-in, both plumbing and electrical, must be completed before the dishwasher is installed. All plumbing and electrical work must be in accordance with local codes. For answers to your Monogram,® GE Profile™ or GE® appliance questions, visit our website at geappliances.com or call GE Answer Center® service, 800.626.2000. Spacemaker Dishwasher Dimensions (Pub. 1-G003 pg. 132B) May 12, 1993 DW PLUMBING/ELECTRICAL ROUGH-IN (IN INCHES) FRONT VIEW Plumbing and wiring must enter within this area from either side, Cold 4 rear or bottom Hot 2" From cabinet 6 19" From wall Cable 24" from wall 2" From floor Ground 3 Black (line) White (neutral) Specification Created 10/07 Listed by Underwriters Laboratories 350512