Hotpoint GSM2260NSS Quick Specs - Page 2

GSM2260N GE Spacemaker® Under-the-Sink Dishwasher 10" from cabinet Allow a 5" radius to prevent kinking Note: A close-fitting elbow or special shallow sink strainer is necessary to provide clearance between sink drain and dishwasher. Dishwasher furnished with 1/2" I.D. drain hose, 78" long. If using copper tubing, 2" length of 1/2" I.D. rubber hose must be provided to connect copper tubing to pump outlet. Disposer should have 7/8" I.D. dishwasher drain connector. Rough-In for Installation with Disposer Dimensions (in inches) Directional flow tee FRONT VIEW Drain connection 4 1-1/2" MAX. dia. hole Waste air gap To air gap Waste tee or disposer Remove hopper plug before connecting dishwasher drain 12" From wall 6 10" from cabinet Allow a 5" radius to prevent kinking Rear View Plumbing Arrangement Dimensions (in inches) 6" Double-bowl stainless steel sink Sink strainer assembly GFC290/300/700 Disposall® unit 1-1/2" Directional flow tee Spacemaker® dishwasher Countertop 25" deep 1-1/2" thick 1-1/2" Close elbow Cold water Hot water Valve to shut off water to dishwasher Hot water supply to dishwasher Dishwasher drain hose Dishwasher water inlet Electrical valve junction box (on dishwasher) 6" Double-bowl stainless steel sink GFC290/300/700 Disposall® unit 1-1/2" Directional flow tee Sink strainer assembly Countertop 25" deep 1-1/2" thick Spacemaker® dishwasher 1-1/2" Close elbow Cold water Hot water Valve to shut off water to dishwasher Hot water supply to dishwasher Dishwasher drain hose Dishwasher water inlet Electrical valve junction box (on dishwasher) Specification Created 10/07 Listed by Underwriters Laboratories 350512