Hotpoint HLD4000NWW Owners Manual - Page 6

About the dishwasher, panel., models, without

Page 6 highlights

About the dishwasher control panel. C omrodewlsithooustensor:EDW4000Series, EDWSO00Series,GHDA400Series,GLD4000Series,GLD5000Seriesand HLD4000Series) You can locate your model number on the tub wall just inside the doon Throughout this manual, features and appearance may vary from your model. !! e SANITIZ_O It. _? _Jf/-h WASH Cycles NORMAL N Control Settings _TART 248 "DELAY" / II- _/iJOptions ii ® "00( .o], MEdEa AS irt H Status Indicator Lights The Status display tells Uou what's happening while the dishwasher is in operation and mau flash, indicating a malfunction (see page 8). The lights will come ON indicating the sequence of operation the dishwasher is in. SANITIZED (on some models) CLEAN (on some models) Disploued when cycle has met sanitization conditions. Light remains ON until door is opened. Displayed when a wash cycle is complete. The light stays ON as a reminder that the dishes are clean until the door is opened or until another cycle is selected. m Cycles The light above the selected pad will be ON to indicate which cf/cle has been selected. SANI WASH (on some models) 7.3 gal., 97 min. This cycle raises the water temperature in the final rinse to sanitize your dishware. The cycle length will va% depending on the temperature of your inlet water. NOTE: The SANI-WASH cycle is monitored for sanitization requirements, If the cycle is interrupted during or after the main wash portion or if the incoming water temperature is so low that adequate water heating cannot be achieved, the sanitizing conditions may not be met, In these cases, the sanitized light will not illuminate at the end of the cycle. NOTE: NSF certified residential dishwashers are not intended for licensed food establishments. POTS & PANS or HEAVV WASH 8.5 gal., 89 min. This cycle is meant for heavily soiled dishes or cookware with dried-on or bakedon soils. Everuday dishes are safe to be used in this cucle. NORMALWASH 5.9 gal., 56 min. This cycle is for medium/heavily soiled dishes and glassware. LIGHT WASH (on some models) 6.1 gal., 36 min. This cycle is for everyday dishes and glassware. CHINA CRYSTAL 6.1 gal., 39 min. (on some This cycle is for lightly soiled china and crystal. models) RINSE ONLY 1.2 gal., 6 min. For rinsing partial loads that will be washed laten Do not use detergent with this cycle. 6 NOTE: Only the SANI-WASH cycle has been designed to meet the requirements of Section 6, NSF 184 for soil removal and sanitization efficacy.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16

About the dishwasher
control
panel.
C or
models
without
osensor:EDW4000
Series,
EDWSO00Series,GHDA400Series,GLD4000Series,GLD5000SeriesandHLD4000Series)
You can locate
your
model number on the tub wall just inside the doon Throughout this manual, features and
appearance may vary from
your
model.
!!
e
SANITIZ_O
_? _/
."
Cycles
It.
Jf-h
_
....
WASH
NORMAL
2
48
_TART
"DELAY" /
N
II-
_/iJOptions
ii
®
"00(
.o,
]
MEdEa
AS
irt
Control
Settings
H
Status Indicator
Lights
The Status display tells Uou what's happening while the dishwasher is in operation and mau flash,
indicating a malfunction
(see page 8). The lights will come
ON
indicating the sequence
of operation the dishwasher is in.
SANITIZED
(on some
models)
CLEAN
(on
some
models)
Disploued when cycle has met sanitization conditions. Light remains
ON
until
door is opened.
Displayed when a wash cycle is complete. The light stays
ON
as a reminder that
the dishes are clean until the door is opened or until another cycle is selected.
Cycles
The light above the selected pad will be ON to indicate which
cf/cle
has been
selected.
SANI WASH
7.3 gal., 97 min.
(on some
This cycle
raises the water
temperature
in the final
rinse to sanitize
your
dishware.
models)
The cycle
length
will va%
depending
on the temperature
of your
inlet water.
NOTE: The SANI-WASH
cycle
is monitored
for sanitization
requirements,
If the
cycle
is interrupted
during
or after
the main
wash
portion
or if the incoming
water
temperature
is so low that
adequate
water
heating
cannot
be achieved,
the
sanitizing
conditions
may
not
be met,
In these
cases, the
sanitized
light
will
not
illuminate
at the end of the
cycle.
NOTE: NSF certified
residential
dishwashers
are not intended
for licensed
food
establishments.
POTS & PANS
8.5 gal., 89 min.
or HEAVV
This cycle
is meant
for heavily
soiled
dishes
or cookware
with
dried-on
or baked-
WASH
on soils. Everuday
dishes
are safe to be used in this cucle.
NORMALWASH
5.9 gal., 56 min.
This cycle
is for medium/heavily
soiled
dishes
and glassware.
LIGHT WASH
6.1 gal., 36 min.
(on some
This cycle
is for everyday
dishes
and glassware.
models)
CHINA
CRYSTAL 6.1 gal., 39 min.
(on some
This cycle
is for lightly
soiled china
and crystal.
models)
m
6
RINSE ONLY
1.2 gal., 6 min.
For rinsing
partial
loads
that will
be washed
laten Do not use detergent
with
this cycle.
NOTE:
Only the SANI-WASH
cycle
has been
designed
to meet
the
requirements
of Section
6,
NSF 184 for soil removal
and sanitization
efficacy.