Hotpoint HTX26EASWWW Quick Specs - Page 1
Hotpoint HTX26EASWWW Manual
![]() |
View all Hotpoint HTX26EASWWW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 1 highlights
HTX26EASWWW Hotpoint® 6.2 Cu. Ft. Capacity Electric Dryer with up to 120 Ft. Venting and Shallow Depth DRYER DIMENSIONS (IN INCHES) EXHAUST OPTIONS: 4-way via rear, right, left and bottom. CIRCUIT REQUIREMENTS: An individual, properly-grounded branch circuit, protected by a 30-amp circuit breaker or a time-delay fuse, is required. ELECTRIC DRYER RATING: 240V, 5600W, 60Hz, 24 Amp, 208V, 4400W, 60Hz, 22 Amp INSTALLATION INFORMATION: For complete information, see installation instructions packed with product for current dimensional data. SPECIAL INSTALLATION REQUIREMENTS ALCOVE OR CLOSET INSTALLATION: - If your dryer is approved for installation in an alcove or closet, it will be stated on a label on the dryer back. - The dryer MUST be exhausted to the outside. - Minimum clearances between dryer cabinet and adjacent walls or other surfaces are: 0" either side, 1" front, top and rear. - Closet doors must be louvered or otherwise ventilated and must contain a minimum of 60 sq. in. of open area equally distributed. If this closet contains both a washer and a dryer, doors must contain a minimum of 120 sq. in. of open area equally distributed. BATHROOM OR BEDROOM INSTALLATION: - The dryer MUST be exhausted to the outdoors. - The installation must conform with the local codes, or in the absence of local codes, with the National Electric Code and National Fuel Gas Code, ANSI Z223 for gas dryers. MINIMUM CLEARANCES OTHER THAN ALCOVE OR CLOSET INSTALLATION: Minimum clearances to combustible surfaces: 0" both sides, 1" rear. 22 3/8" 26 5/8" 27" POWER CORD 4 3/4" 11 3/4" 44" 37 1/2" SIDE VIEW 5" 3 7/8" 1 7/8" 3 1/8" REAR VIEW 4 7/8" POWER CORDS: GE Appliances strongly recommends the use of factory specified parts. Select the power cord to fit your installaton requirements.* NOTE: If the dryer circuit is on a circuit protected by a GFCI breaker, then 3-wire installation is not permitted. Hose wiring and dryer must be configured for 4-wire. Part Number WX9X2 WX9X3 WX9X4 WX9X18 WX9X19 WX9X20 Type 3-Prong 3-Prong 3-Prong 4-Prong 4-Prong 4-Prong Length 4 Feet 5 Feet 6 Feet 4 Feet 5 Feet 6 Feet Amperage 30 30 30 30 30 30 *Order online at GEApplianceparts.com, 24 hours a day or by phone at 877.959.8688 during normal business hours. For answers to your Monogram, Café™, GE Profile™ or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000. Listed by Underwriters Laboratories Specification Revised 2/24
![](/manual_guide/products/hotpoint-htx26easwww-quick-specs-ccb5eeb/1.png)