Hoveround Spitfire EX 3-Wheel Travel Scooter User Manual - Page 11

Caution, Tiller Adjustment, Drive Mode, Freewheel Mode

Get Hoveround Spitfire EX 3-Wheel Travel Scooter PDF manuals and user guides View all Hoveround Spitfire EX 3-Wheel Travel Scooter manuals
Add to My Manuals
Save this manual to your list of manuals

Page 11 highlights

battery pack, and the rear section. Always disassemble or assemble your scooter on a level, dry surface with sufficient space for you to work and move around the scooter. Keep in mind that the disassembled sections of the scooter take up more floor space than the assembled scooter. Caution To avoid personal injury, ask for assistance, if necessary, while disassembling or assembling your scooter. 1. Make sure the tiller is raised before reassembling the scooter. 2. Turn key switch to "OFF". 3. Place the free wheel mode lever in the drive position. 4. Pull upward on the swivel-release lever to remove the seat from seat post. 5. Pick up the battery pack and remove it from the scooter. 6. Pull the connecting device upward to the rear section and stand upright. 7. Take off the front section with both hands and lower the shaft. TILLER ADJUSTMENT 1. To adjust the tiller angle, turn the knob counter-clockwise to unscrew the bolt. 2. Adjust the tiller angel to the desired position; turn the knob clockwise to tighten the bolt. DRIVE MODE Push the freewheel mode lever on the scooter towards the rear direction, and the scooter will be driven by the motor. FREEWHEEL MODE Push the freewheel mode lever on the scooter forward and the scooter can be pushed by hand. Drive Mode Freewheel Mode DRIVING YOUR SCOOTER 1. Turn the key switch to "ON". 2. Check battery gauge to see whether there is enough power for your trips. If you have Spitfire EX 1320/1420 Owner's Manual 10

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
battery pack, and the rear section.
Always disassemble or assemble your scooter on a level, dry surface with sufficient space for you
to work and move around the scooter. Keep in mind that the disassembled sections of the
scooter take up more floor space than the assembled scooter.
Caution
To avoid personal injury, ask for assistance, if necessary, while disassembling or
assembling your scooter.
1.
Make sure the tiller is raised before reassembling the scooter.
2.
Turn key switch to “OFF”.
3.
Place the free wheel mode lever in the drive position.
4.
Pull upward on the swivel-release lever to remove the seat from seat post.
5.
Pick up the battery pack and remove it from the scooter.
6.
Pull the connecting device upward to the rear section and stand upright.
7.
Take off the front section with both hands and lower the shaft.
TILLER ADJUSTMENT
1.
To adjust the tiller angle, turn the knob counter-clockwise to
unscrew the bolt.
2.
Adjust the tiller angel to the desired position; turn the knob
clockwise to tighten the bolt.
DRIVE MODE
Push the freewheel mode lever on the scooter towards the rear direction, and the scooter will be
driven by the motor.
FREEWHEEL MODE
Push the freewheel mode lever on the scooter forward and the scooter can be pushed by hand.
Drive Mode
Freewheel Mode
DRIVING YOUR SCOOTER
1.
Turn the key switch to “ON”.
2.
Check battery gauge to see whether there is enough power for your trips. If you have
Spitfire EX 1320/1420 Owner’s Manual
10