Humax CR-FOXCI User Manual - Page 18

4. Searching Service 4. Searching Service When powering on your product for the first time after purchase, the Selecting Language screen is automatically displayed. Select the language using the button and press the OK button. Then the Antenna Setting menu will be displayed. The default PIN-Code is 0000. ** 4.1 Antenna Setting You can set antenna and LNB information to search services using Antenna Setting (MENU-INSTALLATION-SERVICE SEARCHING-ANTENNA SETTING). ** • Antenna Alternative: Select antenna alternative which has different combinations of settings for search. Antenna Alternative 16 is predefined for SMATV. • Satellite Name: Displays the satellite list in name order. If the desired satellite name is not listed, then select "User Defined". You can enter the Satellite Name using the keyboard displayed on the screen. • LNB Frequency: Select the L.O (Local Oscillator) Frequency of the LNB. • 22KHz Tone: When using the 22HKz tone switch, select "Enabled". Otherwise, select "Disabled". • DiSEqC Input: If you are using DiSEqC (Digital Satellite Equipment Control) switch to connect multiple antennas or LNBs, select DiSEqC input to connect to antenna or LNB. • Motorised System: When using motorized system, select from "DiSEqC 1.2" or "USALS". Otherwise, select "Disabled". When motorized system is set to "DiSEqC 1.2" or "USALS", DiSEqC input is disabled. • LNB Power: You can select "On" or "Off". ** When you complete the settings, press the OK button to move to the Manual Search menu. GB 17