Humax CR-FOXCI User Manual - Page 20

4.3 Satellite Setting This menu appears only when you enable Motorised System in Antenna Setting menu and press the i button while Antenna Alternative in Manual Search menu is selected. ** • Satellite Name: Select a satellite to identify a motor antenna. If the desired satellite name is not listed, then select "other". • Movement: In user mode, this is used to fine-tune the position of the motor. In installer mode, this is used to search for the position of the satellite manually. • Motor Control: You can select one option among "Search", "Go to", "Store", or "Reset". ** - Search: Searches for services on the selected transponder. - Go to: Moves the motor to the saved position of the selected satellite. - Store: Saves the current position of the motor for the selected satellite. - Reset: Resets all saved positions of the motor relative to the 0 position. (Installer Mode Only) • DiSEqC Command Mode: Select "Installer" or "User" mode. ** The following table shows the value of the motor setting options. ** DiSEqC Command Mode Movement Installer East / Stop / West User Stop(60E) ~Stop(0) ~Stop(60W) Motor Control Search / Go to / Store / Reset Search / Go to / Store GB 19