Hunter 20171 Owner's Manual - Page 14
Tighten all three screws firmly.
View all Hunter 20171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 14 highlights
9 • Completing Your Installation With a Bowl Light Fixture (Continued) 9-5. To attach the light kit, connect the upper plug connector from the motor to the lower plug connector in the light kit. Note: Both plug connectors are polarized and will only fit together one way. Make sure the connectors are properly aligned before connecting them. Incorrect connection could cause improper operation and damage to the product. 9-6. Place the light kit over the light kit top housing. Align the holes in the light kit top housing with the light kit. Attach the light kit to the light kit top housing with three housing assembly screws. Tighten all three screws firmly. Plug Connector Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. Housing Assembly Screw Steps 9-5 - 9-6 Light Kit Plug Connector Detail 14 42683-01 • 09/11/09 • Hunter Fan Company Housing Assembly Screw