Hunter 20171 Owner's Manual - Page 9
All wiring must be in accordance with national and local electrical, codes and ANSI/NFPA 70. If - receiver
![]() |
View all Hunter 20171 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Receiver A I H B G F C D E Step 6-3 B • Receiver Black: "AC LIVE IN" • Ceiling Black C • Receiver White: "AC NEUTRAL IN" • Ceiling White Step 6-4 D • Fan Yellow • Receiver Yellow E • Fan White • Receiver White: "LIGHT NEUTRAL OUT" F • Fan Pink • Receiver Pink G • Fan Grey • Receiver Grey H • Fan Black/White • Receiver Black/White: "LIGHT LIVE OUT" I • Fan Red • Receiver Red Step 6-6 A • Ground/Green Steps 6-3 - 6-6 Large Wire Connector Small Wire Connector 6 • Wiring the Fan All wiring must be in accordance with national and local electrical codes and ANSI/NFPA 70. If you are unfamiliar with wiring, use a qualified electrician. Wall switches are not included. Select an acceptable general-use switch in accordance with national and local electrical codes. 6-1. Disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location. 6-2. Place the receiver inside the canopy, making sure that the jumpers and the oval shaped holes in the bottom of the receiver are facing down toward the bottom of the canopy. 6-3. Using the large wire connectors, connect the fan and receiver to the power wires as follows: • Connect the white wire (NEUTRAL IN) from the receiver to the white wire from the ceiling. • Connect the black wire from the receiver to the black wire from the ceiling. 6-4. To connect the wires, hold the bare metal leads together and place a wire connector over them, then twist clockwise until tight. Using the small wire connectors, connect the fan to the receiver as follows: • Connect the yellow wire from the fan to the yellow wire from the receiver. • Connect the pink wire from the fan to the pink wire from the receiver. • Connect the grey wire from the fan to the grey wire from the receiver. • Connect the red wire from the fan to the red wire from the receiver. • Connect the black wire with a white stripe from the fan to the black wire with a white stripe from the receiver. • Connect the white wire from the fan to the white wire (LIGHT OUT) from the receiver. CAUTION: Be sure no bare wire or wire strands are visible after making connections. 9 42683-01 • 09/11/09 • Hunter Fan Company
![](/manual_guide/products/hunter-20171-owners-manual-9966078/9.png)