Hunter 21325 Owner's Manual - Page 12

6 • Assembling the Blades Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 6-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 6-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. This is normal. 6-3. Remove the blade mounting screws and metal shipping ring from the bottom of the motor. Note: Some blade mounting screws are installed in the motor to secure the metal shipping ring. 6-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws. Step 6-1 (Detail) Grommet Use with grommet Use without grommet Blade Mounting Screw Blade Assembly Screws Steps 6-1 - 6-2 Step 6-3 (Detail) Step 6-4 12 45037-01 • 06/06/11 • Hunter Fan Company