Hunter 21585 Owner's Manual - Page 11

7 • Completing Your Installation With a Bowl Light Fixture Installing the Glass Bowl 7-1. Partially install two screws in the upper light kit. 7-2. Align the keyholes in the upper light kit ring with the partially installed screws and rotate to situate the screws in the narrow ends of the keyholes. 7-3. Install the remaining screw into the upper light kit ring and securely tighten all three screws. 7-4. Install included 18W CFL bulb. 7-5. Align the tabs in the globe assembly with the tabs in the light kit ring, then lift the globe assembly and rotate to engage the tabs. Make sure all tabs are properly engaged before releasing the globe. Steps 7-1 - 7-3 Note: In compliance with US federal energy regulations, this ceiling fan contains a device that restricts the light kit to a maximum of 190 Watts. Exceeding that limit or the marked limit on this product may result in fire hazard or improper operation. Screws Bulb Steps 7-4 - 7-5 Glass Bowl 11 42649-01 • 08/13/09 • Hunter Fan Company