Hunter 21617 Owner's Manual - Page 13

9 • Completing Your Installation 9-1. Partially install two light kit fitter screws into the light kit mounting plate. 9-2. Thread the plug connector from the fan through the light kit fitter. 9-3. Align the keyholes in the light kit fitter with the two partially installed screws and rotate to engage the screws in the narrow ends of the keyholes. 9-4. Install the remaining screw to secure the light kit fitter to the light kit mounting plate. Securely tighten all three screws. 9-5. Connect the 2-pin plug connector from the fan to the 2-pin plug connector from the ballast. 9-6. Attach the ballast to the light kit fitter with two ballast screws. 9-7. Install the included 22 Watt fluorescent bulb into the hooks on the fitter. 9-8. Connect the 4 pin plug from the ballast to the fluorescent bulb. 9-9. Place the glass globe into the globe trim band. Align the three holes in the trim band with the three holes in the fitter. Install and securely tighten all three screws. Steps 9-1 - 9-8 Light Kit Fitter Fluorescent Bulb Globe Trim Band Step 9-9 Ballast Glass Globe 13 42700-01 • 01/15/08 • Hunter Fan Company