Hunter 23252 Owner's Manual - Page 6

3 • Assembling and Hanging the Fan Step 3-2 Long Mounting Screw Short Mounting Screw Blade Bracket Blade Ramp Step 3-5 Adhesive Dot with Backing Decal 3-1. Remove the blade mounting screws and rubber shipping bumpers from the motor. 3-2. Assemble the blade ramp, blade, and blade bracket as shown. Note: The blades are two-sided. Select which side you would like to see and install it face-down. 3-3. Align the holes in the ramp, blade, and blade bracket with the holes in the top of the fan. 3-4. Use the 1 1/4" long mounting screws to attach the taller end of the blade assembly to the fan, and the 7/8" short mounting screws to attach the shorter end of the blade assembly to the fan. Tighten all screws securely. 3-5. Leaving the backing on one side of the dots, place the adhesive dots onto the back of the decorative decal (the side without printing). Note: If you have a textured ceiling, you may need to smooth a surface for the dots to adhere, or purchase a thicker adhesive. 3-6. Rest the decorative decal over the motor shaft, with the printed side down. Short Mounting Screw (7/8") Long Mounting Screw (1 1/4") Printed Side (do not install adhesive dots on this side) 6 41081-01 • 08/04/09 • Hunter Fan Company