Hunter 23683 Owner's Manual - Page 10
rubber bumpers from the motor. Save the screws and discard
View all Hunter 23683 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
7 • Assembling the Blades Step 7-1 (Detail) Grommet 10 Use with grommet Hunter fans use several styles of fan blade irons (brackets that hold the blade to the fan). 7-1. Your fan may include blade grommets. If your fan has grommets, insert them by hand into the holes on the blades. 7-2. Attach each blade to a blade iron using three blade assembly screws. If you used grommets, the blades may appear slightly loose after screws are tightened. is is normal. 7-3. Some blade mounting screws are installed in the motor to secure shipping blocks. Remove the blade mountings screws and rubber bumpers from the motor. Save the screws and discard the bumpers. 7-4. For each blade, insert one blade mounting screw through the blade iron, and attach lightly to the fan. Insert the second blade mounting screw, then securely tighten both mounting screws. Blade Assembly Screws Steps 7-1 - 7-2 Use without grommet Blade Mounting Screw Hunter Fan Company Step 7-4 41922-01 • 02/26/07