Hunter 23921 Owner's Manual - Page 6

3 • Assemblage et suspension du ventilateur 3 • Assembling and Hanging the Fan WARNING: Fan may fall if not assembled as directed in these installation instructions. 3-1. Unbundle the wires from the fan. For Standard or Angle mounting: 3-2. To assemble fan to hang down from a flat or angled ceiling, insert the downrod through the canopy. Feed the wires from the fan through the downrod. 3-3. Loosen the square head set screw on the adapter to install the pipe and ball assembly. Note: When the pipe and ball assembly is fully installed, 2-3 threads on the pipe will still be visible; this is normal. Securely retighten the set screw with a wrench or pliers. CAUTION: The adapter has a special coating on the threads. Do not remove this coating; the coating prevents the downrod from unscrewing. Once assembled, do not remove the downrod. 3-4. Raise the fan and place the hook on the ceiling plate through the U-shaped hole in the rim. Steps 3-2 - 3-3 Downrod Canopy Set Screw Step 3-4 U-shaped Hole 6 42786-01 • 08/14/09 • Hunter Fan Company